Chengdu monitoring installation company explains the installation steps of the monitoring system, come and record it! Proceed as follows:
Tools / raw materials
Camera bracket power supply video cable power cable network cable Q9 head, capture card hard disk video recorder, etc.
Self-tapping screws, plastics, hammers, electric hammers, line cards, cable tie crystal heads, network cable clamps
Method / step 1: imitate numbers
There are two types of cameras commonly used today
Method / step 2:
The recording method can use a capture card, but only when plugged into the computer, you can record when you turn on the camera. Using a hard disk video recorder does not require a computer to boot, but that video recorder also needs to be turned on every day.
Approach / Step 3:
The camera depends on whether it is installed indoors or outdoors. Do not install outdoors for outdoor use, and install indoors for outdoor use. Choose a good lens size, 3.6MM, 4, 6, 8, 12, 16, etc. The range of different lenses is different, and the range of 1/3 and 1/4 is not the same. If you look closer, of course Choose 3.6 4 if it is 6MM or more.
Method / step 4:
The device should not be backlit, but the device that follows the light is good. You look at the sun with your eyes, can you?
Method / step 5:
Select the wiring and start laying it. The imitation camera needs a video cable and a power cable, and the power transformer is well placed next to the camera; the digital needs a network cable and a power cable; the power cable comes from the socket and can be connected in parallel to each point (camera) . Connected to the 12V transformer, the good is 2A. The video cable and the network cable cannot be connected in parallel, and each one goes to the video recorder. If there is a problem with the network, the AC can be added together.
Method / step 6:
Install the bracket, power on the camera, connect the 12V power head, imitate the Q9 head, and the digital crystal head. The Q9 head imitated by the video recorder is connected to the DVR interface of the hard disk video recorder, and each channel corresponds to a seat; after receiving the digital signal from the AC, it can be connected to the NVR of the video recorder by a network cable, and then connected to the display or television. Using VGA cable or HDMI cable to connect DVR (NVR) to the monitor (TV) will be better.
Method / step 7:
There is nothing to imitate, there is an image inserted, and then the angle is adjusted, and it is OK. The video recorder can be set to automatically record all day or move the video, which is all done. If the number is digital, some packages will be searched by myself, and some will be manually searched by me. After searching, there are also images that are also adjusted to adjust the angle, set the recording mode, remote connection, etc.
Chengdu Monitoring and Installation Company--Chengdu Yiluo Security Equipment Co., Ltd. is a one-stop service integrator for the design and construction of Sichuan, business monitoring systems, weak current, monitoring installation, weak current engineering and other projects. Our company provides you with a satisfactory processing plan, honesty cooperation, mutual benefit and reciprocity, farewell calls and consultations and negotiation and cooperation.